Model comparison
Branch Four Leg, Duo or Tria: compare the frame and working range
Branch’s Four Leg, Duo and Tria standing desks are not simply the same frame in different finishes. Their listed work-surface ranges, footprints and support layouts make them answer different room and fit questions. This comparison uses the reviewed Bleached Oak / White Four Leg desk in its 48 × 27 and 59 × 27 sizes, three exact Woodgrain / White Duo tops, and three exact Woodgrain / White Tria tops. It compares published specifications rather than claiming comparative stability or laboratory performance.
Read the individual assessments for the Four Leg Standing Desk, Duo 48 × 24 and Tria size family.
Start with support layout and the furniture footprint
The Four Leg uses a familiar four-post outline with four hidden motors and comes here as a 48 × 27 or 59 × 27 rectangular complete desk. Choose the smaller size when the room is tight; the wider one adds lateral room but still has the same 27-inch depth. A four-legged silhouette is a design preference, not proof that this desk is more stable than a two-leg model.
The Duo uses two legs. The reviewed tops are 36 × 24, 48 × 24 and 58 × 27 inches, so it offers the smallest footprint in this group and one wider, deeper plan. Tria is also a two-leg desk, but its reviewed tops stretch from 47.2 to 70.9 inches in actual length and from 27 to 29.5 inches in depth. Measure the full top, chair movement and nearby obstacles; choosing by a room’s nominal wall width alone can leave no space to approach or move.
Compare the height endpoints, not just “standing” labels
The Four Leg’s published finished-surface range is 27.3–44.6 inches. The Duo is listed at 28–47.3 inches; the reviewed Tria options share a 25.5–48.9-inch surface range. Each range is a maker-published completed desk value, not a promise that a particular person’s posture will fit. Measure from the floor to the keyboard surface in both seated and standing positions, then compare with the actual desktop, chair and monitor arrangement.
These numbers change the fit decision: Four Leg starts 0.7 inch lower than Duo but stops 2.7 inches below its highest endpoint. Tria has the lowest start and highest endpoint of these three named configurations. If you specifically need a lower seated surface or higher standing position, that evidence matters more than extra motors or a familiar outline. The Four Leg’s spec sheet claims 1.25 inches per second and noise below 53 dB, while its product page publishes up to 225 pounds lift capacity and 450 pounds static capacity. These maker figures have not been independently measured here, and its static rating should not be confused with the moving lift rating.
Controls, accessories and unknown materials
Branch lists three memory presets and collision detection for the Four Leg, and its manual explains saved heights, a controller lock and user-set minimum and maximum stops. The Duo and Tria controls and accessory arrangements differ; the product-specific reviews explain those distinctions. A cable organizer with or without power is optional on Four Leg, so a staged organizer should not be mistaken for a standard included tray.
One specification gap is worth carrying into a purchase conversation: Branch’s current Four Leg page gives more than one general description of the top construction, while its linked sheet says plywood and HPL. Neither maps those statements cleanly to the newer Bleached Oak selector. The reviewed Four Leg fact therefore treats the exact surface material as unconfirmed. Do not infer solid wood or a particular coating from the finish name or product image.
A practical choice sequence
- Measure the room and shortlist only a top that clears the wall, chair and door paths.
- Compare each shortlisted finished-surface height range with the actual user’s working positions.
- Choose the two-leg or four-leg outline for the room and support layout, without treating leg count as a stability test.
- Confirm the exact selector size, finish, accessory package and material description on the current order page.
If all three frames fit physically, choose the smallest one that leaves enough working surface for the actual devices and usable cable route. Do not pay for a dimension, accessory or performance claim that your setup does not need.