Find a standing desk for your workspace.

This optional exact selector choice is not a wood-species or surface-material claim. The Branch product page and linked spec sheet conflict on top construction; select by finish appearance only.

Choose a selector pair only if it is essential. Natural Oak and Black Oak are finish labels; the spec describes Tria desktops as laminated MDF, not solid wood.

Choose this only when a dedicated nail-service surface is essential; it is distinct from a general office desktop.

A lower tray can change seated keyboard placement, but check that it clears the host desk front edge, apron and drawers.

A caster option can raise the finished surface. Check the selected plan’s resulting height, not just the wheel label.

Caster labels do not prove floor compatibility or quietness. Compare the stated height rise with your finished work-surface range.

Choose this only if the surface must be uncut for pass-through grommets. A no-hole top is different from a powered grommet or a cable tray.

These side cabinets are a separate furniture package, not drawers built into the desktop. Unknown cabinet packages do not satisfy a required storage choice.

A built-in charger does not change the required top size and only helps with devices that support compatible wireless charging.

This choice is specifically for outlet count. It does not promise USB ports, charging wattage, surge protection, or a particular current limit.

A fixed power grommet is not the same thing. The pop-up unit needs its own grounded outlet and clear space below its mounting hole.

A storage grommet is a small cup, not a drawer or cable pass-through. The double-cup option uses both desktop openings; unknown counts do not satisfy the two-cup choice.

A grommet cover routes a cable and can close when unused; it is not an AC outlet, USB charger, or under-desk cable tray.

A mounting track built into the back of the top is different from an accessory tray added underneath.

The separate laptop/tablet stands and staged room accessories should not be treated as in-box items.

Compatibility identifies a mount interface, not a weight limit for a specific monitor arm or microphone boom.

Optional control preference: FRM076 has configurable RGB lighting and an off mode. Unknown keypads do not meet a required RGB choice.

Mounting style affects the face presented at the desk edge, not the lifting frame. Choose a requirement only if it matters; an unknown style satisfies neither flush nor angled.

FRM055 Paddle and FRM066 Advanced Comfort Angled are different controls: the former uses a paddle and two saved heights with reminders; the latter has tactile angled buttons and four saved heights. Leave open if either is acceptable.

The FRM715 ports provide up to 18W each when used separately, or 5W each together; they do not transfer data and are not AC outlets or a desktop power panel.

This question is about power installed in the desktop, not the lift. If you also require a lift that works without an outlet, use the separate lift-power question.

Some desktop USB modules charge phones but cannot connect a keyboard, storage drive or other data device. Unknown port behavior is not a yes.

Count outlets attached to the selected desktop plan, not a power strip. A nonzero requirement is met only by a documented outlet count; an unknown count is not enough.

Measure a safe route to a grounded wall or floor outlet, leaving slack for height changes. Unknown cord length does not meet a required reach.

Measure the unobstructed space directly beneath the desktop hole. Cabinets, shelves and frame parts can block the cord bend. An unknown installation clearance does not meet this optional essential fit check.

A keypad lock prevents controller movement until it is deactivated, but it is not a certified child-safety device. Unknown keypad behavior does not satisfy this requirement.

These are stored operating stops, not evidence of sensor collision detection. Unknown controls do not satisfy an essential condition.

Use the bare-frame height. Add your desktop thickness when planning the actual work surface.

This compares a completed desktop measured from the floor. A bare-frame minimum is not interchangeable; a missing surface-height value does not satisfy this requirement.

For an L-shaped desk this minimum applies to its deepest documented wing; the return can be shallower, so check both arm depths before choosing.

Use this for the tabletop long side, not just frame width. A page-listed size still needs to fit that model’s manual and exact included-top plan.

This compares the manufacturer's published frame rating only. Manuals differ on whether desktop mass is included; do not treat the result as usable payload without checking your exact manual.

A tray is not the same as an included desktop or a complete cable path for every device.

Optional technical filter: four legs do not always mean four motors. Leave this blank unless the drive layout matters to your choice.

Compare only like-for-like published per-side figures. These pages do not state whether the figures are static or moving ratings.

Use the top’s long edge as a room limit. A configuration whose smallest supported top is longer than this limit will not fit.

Measure front to back and include wall/cord clearance. For an L, the main wing may be deeper than the return; check both dimensions in the model review.

Use a manufacturer’s overall footprint depth for angled, curved or wraparound tops. This is separate from the minimum usable depth of the surface.

Optional keypad feature. Leave blank if a manual height adjustment is sufficient.

A wood-look laminate is not solid wood. A manufacturer-labeled bamboo surface is tracked separately; choose laminate only when a laminate desktop is essential.

The Whiteboard top needs dry-erase markers and cleaning; this exact option also has two covered grommet openings, not a no-hole surface.

This is a shape preference, not a promise of better posture. A 120-degree wraparound top is distinct from a curved center-cutout desk; unknown edge shapes do not meet an essential profile choice.

A named surface option can be identified without claiming its material composition. Use the material question for a documented material requirement.

This records the chosen base-color label only; it does not predict how it will match furniture or change model performance.

This identifies the selected single, dual, or triple option and its finish; it does not show that monitors are included or settle a weight/VESA limit. An unknown selection never satisfies a chosen requirement.

Enter the largest display diagonal you need to mount. This compares only a documented maximum size, not screen weight or clearance.

Choose a known mounting-hole spacing only when needed. A compatible VESA pattern does not establish that a monitor’s weight, size or shape is suitable.

Enter the minimum capacity needed for the whole selected mount assembly. Do not treat a desk lifting figure as a mount limit or divide an accessory rating by position without maker data.

Measure the full outside width of the corner outline, including its return. This is different from one continuous desktop long edge.

Use the overall outside corner depth, not the usable front-to-back depth of either separate desktop section.

Orientation is an assembly choice, not a second independently adjustable workstation. Confirm how the selected return aligns with the room before assembly.

The published figure is for the frame without a desktop. Your work surface will sit higher by the thickness of the top.

Compare the exact frame code and manual on the order. Do not transfer a load figure from one Max revision to the other.

If you are unsure, leave this at No preference and compare the exact item code on the frame label or order.

The answer is a minimum required top speed, not the pace you plan to walk. The MVT011 tops out at 4 mph.

Use unobstructed floor space beyond the back end of the machine. The MVT011 manual requires at least 36 inches.

The MVT011 manual requires at least 12 inches on each side.

This is a product capability ceiling, not a health or exercise recommendation. The MVT011 specification says 7% maximum.

UPLIFT’s FRM068 uses two AAA batteries not included and controls up/down movement. Keep the floor pedal under the desk and away from trip paths; it does not add saved-height programming.

This finish selector does not imply that Woodgrain or Walnut is a solid-wood top. The reviewed sheet identifies laminated plywood with HPL surfaces.