Model assessment · Branch

Branch Tria Standing Desk (Natural Oak / Charcoal) review

A two-leg electric standing desk assessed here in three exact U.S. Natural Oak / Charcoal complete-desk selectors. Branch specifies the surface as laminated MDF; Natural Oak is its finish name, not evidence of solid oak or veneer. Actual tops measure 47.2 × 27, 58 × 27 and 70.9 × 29.5 inches, with a stated 25.5–48.9-inch finished-surface height range.

Sources checked 2026-10-25 · Our editorial approach

We may earn from qualifying purchases. Compare the exact model, size and package.

Representative Branch Tria image: Natural Oak top with White legs; the assessed selector has Charcoal legs, and the image is not size-specific.
Representative Branch Tria manufacturer image: Natural Oak top with White legs. The selectors assessed here use Charcoal legs; the image does not identify top size or optional accessories. Branch
A useful fit for

A complete two-leg electric desk for a buyer who wants Branch’s Natural Oak finish with Charcoal legs and can use one of the three verified top sizes. Check actual surface dimensions, the 25.5-inch minimum finished height and separate accessory status before deciding.

The main tradeoff

The Natural Oak label does not establish solid wood: Branch specifies laminated MDF. The image response tied to the Charcoal selector is byte-identical to the archived Natural Oak / White view, so the image is captioned as a representative family image. The 275-lb headline has no stated static/dynamic basis or desktop-mass treatment; a dedicated tray and in-desk power are optional.

Your needs, this model

Does it fit your priorities?

Which exact Tria top and leg-color pair is listed?

This assessment covers Natural Oak top with Charcoal legs. The manufacturer selector feed establishes the finish pair; the spec sheet identifies the top as laminated MDF, not solid oak.

Explore this need in the finder →
What is the largest actual top in the Natural Oak / Charcoal selectors?

The largest exact SKU is nominally 71 × 30 inches but the specification sheet gives 70.9 × 29.5 inches. A hard 71-inch length or 30-inch depth minimum is not met.

Explore this need in the finder →
How low does the finished Tria work surface reach?

Branch specifies a 25.5-inch minimum complete-surface height. A stricter below-25.5-inch essential requirement is not met.

Explore this need in the finder →
Is laminated MDF acceptable, or is solid wood required?

Branch specifies laminated MDF. Natural Oak is a finish name and does not satisfy a requirement for solid oak or other confirmed solid wood.

Explore this need in the finder →

The Branch Tria in Natural Oak with Charcoal legs is a finish-specific version of the electric Tria desk, not a different lifting system. The U.S. selector feed lists three complete-desk sizes in this exact top/base combination. Natural Oak is the maker’s finish name: the Tria specification identifies the desktop as laminated MDF, not solid oak or a documented oak veneer. Buyers should choose this version for its pale wood-look surface and darker frame, while deciding size, height fit and add-ons on their own merits.

Choose the size by measured surface, not the rounded label

The three exact Natural Oak / Charcoal SKUs are 10-14-05-132, 10-14-09-132 and 10-14-13-132. Their nominal labels are 48 × 27, 58 × 27 and 71 × 30 inches; Branch’s spec sheet gives actual surfaces of 47.2 × 27, 58 × 27 and 70.9 × 29.5 inches. The smaller options use a 27-inch depth, while the largest is a little less than 30 inches deep. If a room, wall or clamp-on accessory requires a strict 71-inch top length or 30-inch depth, do not treat the rounded largest label as a match—the listed measured top falls short of either threshold.

For a compact room, the 47.2-inch plan leaves more width for circulation but offers less space for two monitors, a laptop and paper at once. The 58-inch plan is the middle footprint. The 70.9-inch plan is the one to assess for wider equipment, but remember the extra depth as well as the length. Measure chair travel, door clearance and cable reach; do not choose by the room’s wall length alone.

Check the finished-height range against your setup

Branch specifies the complete desk’s work surface from 25.5 to 48.9 inches above the floor. That is a finished-surface measurement, not a separate bare-frame range. Before buying, compare both endpoints with the seated and standing working heights you actually need, including footwear and any support surface. A desk that reaches a comfortable standing height can still be too high at its lowest point for a particular chair or setup; the product’s stated 25.5-inch floor endpoint is the useful limit here.

The Tria has a two-leg base with three-stage lifting columns and two memory positions. That is enough for a couple of saved heights, but not a large household preset library. Branch lists collision detection and programmable reminders; it also claims a 1.3-inch-per-second lift speed and noise below 50 dB. Those are manufacturer specifications, not independent measurements in a furnished room. The source does not establish a motor count, so do not infer one from the column design.

Understand the capacity and cable package

Branch publishes a 275-pound maximum or lift-capacity figure. The spec does not say whether that is static or moving load, or whether the desktop’s own mass is deducted. Treat it as a manufacturer headline rather than a verified static-load rating. If your essential condition is a confirmed minimum static or dynamic rating, this listing does not answer that question.

The base Tria package includes a felt cable organizer and cable clips, plus a cable notch in the desktop. The dedicated cable tray and in-desk power panel are optional compatible extras, not included features of the three complete-desk selectors reviewed here. The desk has no included drawer, casters or built-in power outlets. That distinction matters if you want a clean cable route or charging ports out of the box: compare the full package you intend to order rather than assuming the product name includes every accessory shown in a staged room.

Who should shortlist this finish?

This version suits a buyer who wants a complete electric two-leg desk, a light oak-look top with Charcoal legs, and a size among the three measured options. Its useful deciding points are the 25.5-inch minimum finished height, the relatively deep 29.5-inch largest top, two saved positions, and the separate status of the tray and power panel. The Natural Oak / White version shares the same basic Tria platform if a lighter base better fits the room; changing the leg color does not change these documented dimensions or add a feature. Branch lists a 10-year warranty for the tabletop and frame; check its current terms and exclusions before buying.

Look elsewhere if real oak is essential, if the footprint must be at least 71 inches long or 30 inches deep, if you need a desk below the stated 25.5-inch surface minimum, or if a known static-load figure, built-in drawer, casters or integrated power is non-negotiable. Confirm the exact Natural Oak / Charcoal option and SKU with the retailer before ordering: Branch’s product imagery is not a substitute for selecting the finish pair, and an image may show a different leg color. For the lowest-risk choice, let measured fit and included package decide first; use the finish as the final preference once those needs are met.

Key details at a glance

Leg count2
Minimum supported desktop width47.2 in
Maximum supported desktop width70.9 in
Minimum supported desktop depth27 in
Maximum supported desktop depth29.5 in
Programmable height presets2
Cable tray includedNo
Published frame and mechanism warranty10 years
Frame layouttwo-leg
Minimum working-surface height with desktop25.5 in
Maximum working-surface height with desktop48.9 in
Built-in drawer includedNo
Built-in AC/USB power panelNo
Built-in AC outlets0
Documented desktop materiallaminate

Use the exact model’s instructions for operating limits, supplied equipment and version differences.

Sources for this assessment

Choose a desk around your real setup.

Start with whether you need a complete desk or a converter for an existing fixed desk, then choose the support layout and surface package. Add exact height, top and cable constraints only when they matter.